Hot Tub Removal in New London County, CT

The tub's address decides the tier

Two tiers, and where the tub lives picks which one is yours. The lower tier covers a tub sitting on grade — a pad, pavers, or a gravel bed with a path a person can walk. The higher tier covers the built-ins: tubs framed into a deck, dropped into a platform, or sunk into a vault, where the shell has to be freed before anything gets cut. The grid above renders both starting figures live from the same canonical pricing data as the demolition hub, so this page can't quietly drift from the master list.

Between the starting figure and your final number, the walkthrough weighs three things: how long and how pinched the carry path is, how much structure has to open up to free the shell, and how much of that structure you want gone for good versus patched around. Draining, disposal, and metal recycling all live inside the fixed price — there's no dump-fee line waiting on the invoice. That's what up-front pricing means on this job.

One honest aside: if your tub genuinely still runs, list it free-for-the-hauling locally for a week first. Working tubs occasionally find takers, and we're happy to be plan B when nobody bites. The full cost anatomy — DIY math included — lives in our hot tub removal cost guide.

And the map is bigger than this page: we take tubs out anywhere in Connecticut, each one quoted on its own terms — size, access, what it's built into, and distance all weigh in, never a price card. Send photos or a Street View link through the demolition quote form and you get a real number back, not a range; the number we quote is the number you pay.

Cut, slide, or crane — three ways a tub leaves

Cut-up in place is the default and the right call for most Connecticut yards. The shell and cabinet get sawed into carryable sections where the tub sits, and the pieces walk out through the same gate you use. An empty six-person tub still weighs several hundred pounds in the least carryable shape ever molded — cutting it beats wrestling it past a stone wall, and the flowerbeds survive.

Slide-out happens when the geography cooperates: tub on grade, wide path, no steps, truck close. We tip it, walk it on rollers, and it leaves in one piece — the fastest version of the job, and the one to ask for if a buyer or a new pad is waiting for the tub somewhere else.

Crane-out is the specialty case — a tub on a raised deck or behind an obstacle course where neither cutting nor sliding makes sense, usually because the tub needs to survive intact. It's the least common of the three and the one that most needs a walkthrough first.

Whichever method, the sequence is the same: your electrician kills and disconnects the feed before we arrive, we drain on site, and the tub is usually gone within a couple of hours of the first cut. One visit — we never leave a half-cut tub sitting overnight.

The eastern edge of the map

New London County jobs run on the I-95 corridor — the shoreline band we serve sits at the ~45–75 minute end of our reach, and we route jobs out here in blocks rather than scattered singles. Practically, that means booking a few days ahead gets you a firm window, and a job that pairs with a neighbor's — two tubs, or a tub plus a shed — schedules even easier.

On the ground, lower-county access is coastal access: modest yards, fences, and the occasional tub sited for the water view rather than the exit path. Sections carry out the way they do on any shore lot, and the walkthrough paces yours before the price is fixed. If you're unsure whether your address falls inside our lower-county band, ask when you call — it takes ten seconds to check.

What rides out, what stays behind

Everything that made it a hot tub rides out with us: shell, cabinet, cover, steps, heater, pump, and the equipment pack. The sections go to state-permitted CT transfer stations in our own trucks — shell broken down as bulky waste, cabinet lumber with the wood stream, and the metal pulled for scrap wherever the facility takes it, which is most of them.

Two things never ride with us. Water gets pumped on site as part of the job, routed somewhere on your property that isn't a foundation, a septic field, or the neighbor's yard. And leftover spa chemistry — chlorine, bromine, pH kits — is household hazardous waste that belongs at your town's HHW collection, not in a truck bed.

Concrete stays, per the same rule as every structure we remove: a pad under the tub becomes your patio or your next project's base. And an in-ground concrete or gunite spa is a different animal entirely — that's excavation and fill, coordinated through our licensed demolition partner rather than self-performed. The above-grade acrylic and rotomolded tubs — the vast majority of what's in CT backyards — are the ones our own crew handles start to finish.